TEC 2-1 TRACKER Full Stainless Exhaust System for Triumph

£269.99

TEC ‘TRACKER 2-1 Full stainless exhaust system.  Our most popular exhaust system provides greatly improved looks and performance for amazing price.

A shorter version of our 2-1 exhaust for that just pulled off the Racetrack look.

You must inform us if your bike has a centre stand fitted and we will include a centre stand stop bracket free of charge.  Please add a note on the order during checkout.

Benefits include-

Super light weight

Re-packable muffler

Easy  baffle removal.

Unlike many aftermarket exhaust ours CAN be fitted with main stand and side stands.

Our exhaust system will give you improved mid range and max power.

No need to re jet or re map if baffle left as standard

Full kit with detailed instructions, gaskets, springs and blanking plugs.

Easy to fit with basic hand tools.  Watch how easy it is to fit and see our fitting video to hear it running at- http://www.youtube.com/watch?v=uuHGoRbPSb0

Fit all years and models of Bonneville, Thruxton, T100, SE.  Will also fit Scrambler with small modifications.

All parts also available as spares or for special builds

Note on Videos below

The modifications on the Delboy video are only required when fitting to Scrambler models!

NO modifications required on all other Bonneville/Thruxton/SE models fits all models except speedmaster /America

Triumph part numbers for the parts mentioned in Del Boy’s video (Only needed if you are fitting to a Scrambler, not necessary for any other model):

T2218053 Frame bolt x1
T2074993 Pin Bolt x1
T3020485 Rubber bush x2

Quantity:

Customer Reviews

Based on 93 reviews
88%
(82)
11%
(10)
1%
(1)
0%
(0)
0%
(0)
D
D.M.
Surprisingly awesome

I ordered the Tec 2 into 1 exhaust in an effort to own a customised Thruxton R.
From the initial email these guys have been nothing but helpful and friendly.
The exhaust looks and sound awesome an it arrived in Australia in 3 days. (Then the Aussies slowed it down a bit )
Fitted the bike like a bum in a bucket in under 2 hours.
I would rate this business 6 stars if I could.
I’ll be back for more.

s
shin tsuruta
awesome

exactly fitted on my thruxton900.
sounds and looks are great!!
In addition, the price is reasonable.

W
Will Dawson
Great looking exhaust.

Order arrived promptly and well packaged with clear instructions. I decided to fit new s/s head studs as the old ones were badly corroded and airbox baffle removal at the same time.
I like the way the new exhaust hugs the frame, downpipes a lovely copper colour. With baffle in
louder than standard but still neighbour friendly. Bike runs smoother and has better pull away.
My only niggle is the centre stand stop which looks like a cheap afterthought, but it was free!
Overall a great buy at a good price.

V
Val Lupton
tracker exhaust

Hello
The exhaust is good quality and the service was very good.
The exhaust is fitted to a 2006 scrambler , i was aware of the slight modification to the pipe to make it clear the rear brake master cylinder so that was no problem .
The problem came when i fitted the intermediate pipe " offer up intermediate pipe to front exhaust and push them fully home " .
Upon doing so and trying to fit the springs it became apparent that the springs where to long i had to bend the end tabs of each spring to get enough tension on them to retain the intermediate pipe fully home . Even then i think the spring are still slightly to long .
Second observation is with the rear silencer footrest mounting the silencer fitted into the frame mounting ok but it is not clear in the instructions as to the correct way to fit the original top hat washer , fitting can only be done in one direction but this does not clamp the exhaust pipe tight against the frame loop there being slight movement in the area , is this correct ? .
Apart from those points everything seems fine unfortunately coming down with COVID has prevented me from taking the bike for a ride to bed the exhaust in
Regards.

P
Paul Handley

Very quick post to oz less than 8 days exhaust good quality and an easy fit to the bike