TEC Performance Camshaft – Royal Enfield Meteor 350 / Classic 350 / Hunter 350 / Bullet 350

Stage 2 camshaft kit (fast road cam) for 350cc J Series models from 2021 onwards.

This high quality camshaft kit is made from  from precision ground hardened billet steel.

Our camshaft will normally give a power increase in the range of 15-25% over the stock bike, however this will depend on what other changes have already been made, or you intend on making. You can expect around a 15% gain on a completely stock bike, and up to 25% on a bike with a modified inlet and exhaust, which is also using a fuelling device (Fuel X or similar). This will give you the extra power to fit a larger front sprocket for a more relaxed cruising top speed.

NOTE – In the UK all 350cc J series models, except the Hunter 350, have a max speed limit map installed on the ECU, this extra power will not give the bike a faster top speed, except the Hunter 350.

You may also need to order (you can order these from your RE dealer if required):

• R.H. side case gasket
• Timing Chain Adjuster Gasket

Basic tools are required for installation, as well as a torque wrench that reads 10nM or less.

Our 2nd picture shows the difference between the stock cam and the TEC billet cam.

Fitting is straightforward, we supply as an optional extra the 2x specialist tools needed for installing the camshaft, these tools are – Cam Locking Pin & Cam Timing Tool

We can supply together with the cam tools at a discount by buying them at the same time.  The cam tools are also available separately.

24 month warranty included.

Installation and Product Guide: