TEC Alloy CNC Adjustable Rider Foot Pegs – Interceptor 650 & Continental GT 650 – Black or Silver
£41.66 – £58.33
As soon as we rode the Royal Enfield 650 models we knew we needed to make these. Lots of you have also requested we make adjustable rider pegs as well.
Supplied in pairs with 20mm adjustment in 8 different directions.
To fine tune your foot position we also supply with optional 40mm adjustment range arms at additional cost.
The pegs can be used with stock levers but they will ideally be used with our matching adjustable alloy brake & gear lever systems.
Available in all black or with silver pegs.
UK Registered design – 6189348 & 6189349
See fitting video:
Having previously tried another system (which relocated the foot peg hanger) with limited results, I can honestly say that these are transformational. I’m about 6’ 1”, and had struggled a bit with the relatively high pegs. These TEC ones just feel ‘right’ for me and the bike. Definitely worth buying the 40mm extenders and the tapered washer kit. The standard 20mm extenders didn’t lower the pegs sufficiently for me, and the tapered washers correct the error in the RE frame where the left side hanger fixes on, resulting in a peg which sits at right angles to the frame!
The only slight complaint (echoed by others here) concerns the need to fettle a bit to get them to fit. In my case, the RE springs wouldn’t fit on top of the new pegs until I inserted a thick washer in the ‘fork’ of each new peg to stop the spring spreading the full with of the (wider) slot in the new pegs.
Hi had to cut 2_3mm off the back of the peg as they wouldn't fit flush in the hanger , probably the holes on the hanger in the wrong place after a bit of filling all good now
lowering the footpegs was the best, that i did to my interceptor. Thanks TEC for letting me ride far more relaxed with my 6'2".
These are a great product - especially with the 40mm extensions. I finally have my circulation back in my legs! However, they are not as easy to fit as the Tec Bike Parts video suggests. The issue I found, was a very tight fit when attempting to get the pegs aligned with the hangers on the bike. Some manipulation and a rubber mallet resolved this, but perhaps a slight modification to the thickness of the parts would ensure an easier fit. Apart from that - very pleased 🙂
Excellent, just what I needed, so good been able to adjust to suit me. Very well made ,