1

CNC Alloy Headlight LONG brackets for T120/T100 and 41mm forks

(28 customer reviews)

£44.99

We have made this longer version of our very popular TEC – CNC alloy headlight brackets as the shorter type we make will not fit some bikes with large headlamp shells like the water cooled T100 and T120 models, and also the earlier Thruxton 900 and T100 air cooled bikes.

This larger type now measure 120mm from the front edge of the fork tube to the headlamp mount bolt centre.

These brackets are light weight, but very strong and change the look of the bike dramatically.

Fully machined from billet alloy and black anodised for durability.

Will fit all 41mm diameter forks. Length from centre of headlight mounting hole to face of forks: 115mm.

Quantity:
Rating
4.1 out of 5
Based on 28 Reviews
22
1
0
0
0
5
Peter S.
July 14, 2025

Great product

These are beautifully made and presented. They fit exactly as intended and looks brilliant.

Xerxes A.
January 2, 2025

CNC Alloy Headlight LONG brackets for T120/T100 and 41mm forks

phil A.
November 25, 2024

Headlamp brackets (Long)

A great product and great service from guys at TEC as usual. Only took 30mins to install & a great fit. Brackets are are of a high quality and look perfect with the Lucas type headlamp on the Bobber.

Review ImageReview Image
Bob K.
April 17, 2024

Nice Upgrade

Fitted these to my 2010 SE and transforms the look from the ugly lumpy originals. Easy fit while changing the fork seals. Decided to drill them to mount the indicators and it looks great. Fine quality items and fast delivery. Very happy.

Ian G.
December 16, 2023

Headlight brackets

Now fitted, spot on will use tec again definitely

Nick P.
November 15, 2023

T120 headlight brackets

Lovely quality product so much better than original one of the fixing bolts was faulty reported fault and was sent two new ones good service.

Review ImageReview Image
Robert H.
October 9, 2023

Nice.

Well made, looks really good in the bike removing the old clunky mounts. Really quick delivery, well packaged. Fantastic company to deal with. Thanks.

Review ImageReview ImageReview Image
BobberDaddy
February 8, 2022

Alloy LONG headlight brackets

Purchased the alloy LONG brackets for my RE GT 650 which replaced the awful OEM cast items. The TEC brackets are quality items which fit the 41mm fork legs perfectly, but you will need spacers between the bracket and the OEM headlamp bowl to ensure brackets are aligned parallel (I used 12mm thick spacers). You will also need to fit a reducer sleeve for the headlamp bolt (the OEM bolt is M8 and the bracket hole is approx 11.5mm). I used a 5mm thick M8 black nylon washer with an outside diameter of 12mm which I sanded until a snug fit in the bracket hole. I chose the LONG brackets because I was fitting a fairing and wanted to push the headlamp forward another 30mm to eliminate possible contact problems between the fairing and the clocks, cables etc.. There is sufficient area on the bracket to drill an M8 hole to fit an indicator should you wish but I placed inicators on the fairing. As per usual TEC service and communication is second to none. Another great TEC bike part - just saving for the Stinger exhaust now!!

Review ImageReview ImageReview Image
Santino
November 4, 2021

Front bike completed and upgraded

this is a very unique staff no bloody expensive and looks very good, my front bike thanks to Tec bike is complete, everything you see on the catalogue for the front parts I fitted, lever, fully forks upgrades, indicators bracket, mirrors, this is was the last piece of the puzzle. Well made Tec.

TREVOR B.
September 18, 2021

Alloy brackets

I found the easiest way to do this is put bike on the centre stand, take off top yoke, remove triumph brackets, slide on alloy brackets, replace top yoke, job done no problem. Oh and they look amazing'

Robert G.
September 8, 2021

Brackets

Headlight brackets well made fitted a treat after strip down to fit them. Look cool and saved some weight 😁 Once again very pleased with product and service Cheers

Ian C.
August 27, 2021

Head Lamp Brackets

This is a quality product & enhances the front perfectly. The only neg comment I have is that the earlier T100 (mines 2021) might have had a smaller diameter Headlight as the legs are a little splayed on my bike when tightening up. Having said that, I love the look of the finished piece & keep going back to Tec as their service & communication is second to none. More orders coming up.

Srikanth C.
August 17, 2021

CNC Alloy Headlight LONG brackets for T120/T100 and 41mm forks

Alex M.
June 30, 2021

Light weight brackets.

Perfect fit and look a lot better than the heavy standard brackets. Also allowed me to fit a more traditional Lucas headlamp shell with a more effective quadoptic headlamp.

peter B.
April 16, 2021

Quality headlamp brackets

Fitted these and it’s changed the look of the bike, very well made and easy to fit, superb service and product, 👍👍👍👍👍👍

Lol P.
February 2, 2021

Head light brackets (Thruxton 1200)

Really nice bit of kit. Does away with the over complicated standard brackets and they sit lower on the forks. I'm well pleased with the delivery of them too.

Eduardo M.
January 27, 2021

Cleaner look!

They look way much better and it was an easy installation! The price is a bargain!

David H.
November 29, 2020

Alloy headlight brackets

Nicely machined and finished a quality product. Great service as usual.

L W.
November 25, 2020

fast delivery well packaged looking good on the bike

Carl F.
October 24, 2020

Nice bit of kit, very simple to fit. Came very fast and very well packaged.

Ben B.
June 2, 2020

Great quality headlight brackets and TEC somehow managed to get them to delivered super quick during lockdown, I’m a happy man and will continue to order from you guys, thank you

Aaron T.
May 28, 2020

Lovely finish. looks way better then the original

Alex
November 19, 2019

Another great product at a fraction of the price of competitors.

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *