Interceptor 650 30mm bar riser kit
£25.99
We have been asked many times for bar risers for the Interceptor – so we made this kit!
The kit consists of:
- 2 x correct length fine thread high tensile bolts (Note – these bolts are not a standard length/thread, and are specially made)
- 2 x 30mm machined alloy spacers
- 2 x washers
Very simple to install – simply remove the bar clamp mounting bolts from bellow and fit the new longer bolts/washers/spacers to lift bars 30mm.
All the cables etc will work with 30mm lift but some may need to be rerouted slightly.
CLAMPS AND BARS NOT INCLUDED AND SHOWN FOR ILLUSTRATION PURPOSES ONLY
Out of stock
Want to be notified when this product is back in stock?
Easy to order on line, parts arrived promptly, easy to fit, just had to gain a bit of excess slack on the switchgear cabling from inside the headlamp housing.
I'm over 6 foot and these make a massive difference to the comfort levels on my Interceptor
A simple and effective way to increase your riding pleasure at a modest cost.
Well designed and engineered, easy to install once you sever the zip ties around the cable to loosen them since there is not much leeway. One caveat though : with the Stinger 2-in-1 exhaust system in place, the clutch cable will touch the pipe which becomes extremely hot, so plan some heatproof exhaust wrap (see picture).
After a three-hundred-mile journey through the sunny valleys in Provence, the riding position proves to be improved (I am 5'11 tall). It even has repercussions on the contact with the stock seat (which is notoriously known to be uncomfortable on long distances), since the upper body is straightened up, which involves less weight on the thighs.
Easy to fit,great quaulity, standard cables work a treat even on full lock,highly recommend tecbikeparts
Easy to install.
The quality is good.
Wow driving is comfortable.
Highly recommended for those with neck and back discomfort
