Full LED Lighting Kit – Including Indicators, Tail Lamp, Headlight Brackets & Wiring – Black or Silver


Full LED lighting upgrade kit for the Royal Enfield Interceptor & Continental GT 650.

A drawback of the latest Royal Enfield Twins is the quality of the indicators and large rear light which are produced in chromed plastic.

We have designed this kit to vastly improve the quality and look of your bike and tidy up the rear-end.

Kit consists of

  • Plug & Play rear wiring harness
  • Plug & Play front indicator wiring adaptors
  • Front headlight brackets
  • Front indicator mounting brackets
  • Rear indicator mounting adaptor brackets
  • LED tail light, incorporating a number plate light
  • 4x LED solid body alloy (not plastic) indicators – for front and rear, E-marked

All parts are available separately, normal RRP when bought separately is over £150.

Installation is straightforward.  You will be required to drill 2x 6mm holes to mount the rear lamp in the alloy housing.  Otherwise, everything else is bolt on.

IMPORTANT – You sometimes need to add a pair of indicator resistors in the headlamp or an adjustable rate flasher unit to regulate the flash speed on the LED lamps.  This is not included in the kit.

Headlight brackets can be used with stock headlight or smaller headlights.  The headlight brackets cannot be used with a genuine RE screen.

Instructions on how to fit the headlight brackets can be found here.



Customer Reviews

Based on 10 reviews

Top company to deal with. Top equipment and well designed.
Top communication and the delivery was top notch. Fast and well packed. Thank you

Lighting kit

This is a great upgrade for the Royal Enfield Continental 650,fitting was done by my local motorcycle garage due to lack of time on my part,he said it was a straight forward fit,overall,a great product and great service as always.

Great product and really good service

I ordered this kit for my Continental GT after looking at a few options. All the components are really good quality, could just do with some fitting instructions, although it's not too difficult to work out how to fit them. The tail light and indicators are nice and bright and do look much better than the stock units. I haven't fitted the headlight brackets and front indicators yet but imagine these will be straight forward to fit also. I have ordered a few parts from Tec for the bike, all are of a very high standard

Easy enough to install

More or less plug and play I did a bit of tweaking but easy enough to do. Very bright.

Light kit

As always with this company, great product delivered quickly. Looking forward to fitting it all.